Most calls start the same way. Something stopped working, or something started behaving strangely, and the person calling is not sure yet whether it is a bad outlet, a tripped breaker, a wiring fault, or something deeper in the panel. That is a normal place to start. Working out what is actually wrong is part of what we do, and it begins on the phone before anyone is dispatched. We take calls from homeowners, property managers, and business operators across Shelby Township and the surrounding Macomb County area, and we handle the job from diagnosis through to a finished, tested repair.
Shelby Township is a city with a lot of residential property, and much of it carries the kind of electrical history that comes with age. Panels that were sized for a different era, circuits that have been added to over the years, and wiring that has never been fully documented are common situations here. We work through all of it. We are available every day from 8 AM to 11 PM, and the first call is where the scoping starts.
When we complete a job, the work does not just disappear into the walls. We test every circuit we touched, confirm the panel is labeled correctly for what it now carries, and document what was done. That record matters more than most people realize until the property changes hands or a tenant calls with a question nobody can answer.
A clearly labeled panel tells the next electrician, the next inspector, and the next owner exactly what is where. Circuits that have been added over the years without documentation create confusion later, and that confusion can slow down a sale, complicate a rental inspection, or turn a simple repair into a longer job than it needed to be. We leave the panel and the work area in a state that makes the next visit straightforward, not a puzzle.
For rental properties in particular, a clean electrical record is practical information. Knowing what is in the walls, what protection is in place, and what has been updated is the kind of documentation that holds up when questions come up later.
The price on an electrical job is shaped by a few things, and we talk through all of them on the call. What the fault turns out to be matters. What has to be opened up to reach it matters. Whether the existing circuit or panel can carry a change matters. None of those are things we can guess at before we know what the job involves, so we scope it on the call and confirm the price before the visit is booked.
There are no figures to recite here, because the right number depends on the situation in front of us. A panel upgrade involves different work than a single outlet replacement, and a circuit that runs through a finished wall involves different access than one in an open basement. What stays consistent is that you get the rate before anything starts, and if the scope changes once we are on-site, we explain why before the work continues.
Clear communication from the first call to the final test is how every job goes.
Call (947) 999-8795 and we will talk through what your situation involves.
Appointments are arranged on the call. We confirm what the job involves, agree on the price, and set the visit. For properties with tenants, we work around occupancy so the people living or working there are not caught off guard. For a business that has to stay open, we talk through the timing before the visit is booked so the work does not create a problem for the operation.
When a problem will not keep, we take short-notice calls. A burning smell near a panel, a breaker that will not hold a reset, or a sparking outlet are not situations to leave until a convenient slot opens up. We are available every day from 8 AM to 11 PM, and we handle urgent calls within those hours. Ask what the schedule allows and you get a straight answer.
Every job gets treated like it matters, because it does. That is true of a ceiling fan installation and a panel replacement alike.
In most Shelby Township homes, the panel is in the garage or the basement. Occasionally it is in a utility room or a hallway closet, and in older properties it may be in a location that made sense at the time but is harder to access now. Knowing where it is before we arrive is useful, but if you are not sure, that is fine too.
What actually helps a visit move quickly is simple. The panel should be accessible, meaning nothing stacked in front of it. The area around the outlets, fixtures, or circuits we will be working on should be reasonably clear. If you know which breaker controls the affected area, having that information ready saves a few minutes. Beyond that, the diagnostic work starts when we arrive.
For panel work specifically, a basement or garage with clear access around the panel means we can get to the service entrance and the breakers without working around obstacles. A panel that is blocked or buried behind storage takes longer to work on, and longer means more of your day spent waiting.
When we find previous work inside a wall or a panel that does not meet current standards, we explain what we found before anything else happens. Some of it can be corrected in place. A connection that was made incorrectly, a wire that was not secured properly, or a breaker that was swapped for the wrong rating are all things we can address as part of the visit.
Some of it has to come out. Wiring that is damaged, connections that were made without a proper junction box, or circuits that were run without the correct protection are not conditions we work around. We tell you what we found, what it means, and what it takes to fix it. The scope is agreed before the work continues.
We tell the difference by looking at the work itself, not by assuming. A previous repair that was done correctly stays. One that creates a hazard gets addressed. There is no drama in it, just a straight account of what is there and what it needs.
A dedicated circuit puts one appliance on its own breaker so it is not sharing capacity with the rest of the house. Electric dryers, ranges, dishwashers, and refrigerators all draw enough load that a shared circuit causes problems over time. Many of them require a dedicated circuit by code. We run the circuit, install the correct outlet type for the load, and confirm the panel has capacity before the work starts. If the panel is already full, a subpanel or a panel upgrade gets discussed before anything else.
A breaker that trips once and holds is usually a temporary overload. A breaker that trips repeatedly on the same circuit, or that trips without a clear load on it, points to something else. An intermittent fault is one of the more time-consuming problems to trace because it does not always show itself on demand. We work through the circuit systematically, checking connections, looking for damaged insulation, and testing for ground faults and arc conditions. The goal is to find the actual cause, not just reset the breaker and leave.
A panel where half the breakers are labeled "misc" or "upstairs" is not useful when something goes wrong. We trace each circuit, confirm what it controls, and label the panel clearly. This is often done as part of a larger job but is worth scheduling on its own for any property where the documentation has never been done properly. For homes being prepared for sale or for landlords taking over a new property, a labeled panel is a practical starting point for understanding what the electrical system actually contains.
Low-voltage work covers the wiring side of doorbells, video doorbell systems, data runs, and structured wiring for home networks. The wiring itself is low-voltage, but where it connects to a transformer or a powered device, the line-voltage side of the installation is our work. For new construction rough-ins or renovation projects where conduit and boxes need to be placed before the walls close, we handle the rough-in so the low-voltage installer or the homeowner has what they need in the right location.
Backup generator hookups, GFCI and AFCI protection upgrades, and electrical safety inspections round out the calls we handle regularly across Shelby Township. For the full picture of what we cover, the services page has the detail.
We cover Shelby Township and the communities around it throughout Macomb County and the neighboring area. That includes Utica, Macomb Township, Sterling Heights, Rochester, and Rochester Hills. Whether the property is inside the township or just outside it, the same work applies and the same process holds.
If you are not sure whether your address falls within our service area, call and ask. We will tell you what is available.
A dryer runs on 240 volts and requires a dedicated 30-amp circuit with a specific outlet configuration. Standard 120-volt outlets cannot support a dryer. We run the dedicated circuit, install the correct outlet, and confirm the panel has the capacity before the work is scheduled.
We start by checking the panel and the circuits on the property. If the panel is intact and the issue appears to be upstream of the service entrance, we advise you to contact the utility, since the supply line from the street to the meter is their responsibility. We explain clearly where the boundary is and what the next step looks like.
Yes. We serve Shelby Township and the surrounding area, including Macomb Township, Utica, Sterling Heights, Rochester, and Rochester Hills. If you are not sure whether your address is covered, call and we will confirm it on the call. Coverage does not stop at the township boundary.
We can install a temporary power supply for an outdoor event when there is a suitable panel to feed from and enough time to schedule the work in advance. The scope depends on the load the event requires and what the existing electrical system can support.
Call (947) 999-8795 to talk through what the setup would involve.
A car lift typically requires a 240-volt dedicated circuit sized to the lift's motor rating. Before we run that circuit, we confirm the panel has the capacity to support it. If the panel is already at or near capacity, we discuss whether a subpanel or a main panel upgrade is the right path.
A change of ownership often triggers a closer look at the electrical system, either because a buyer wants to know what they are getting or because a sale inspection flagged items that need attention. We handle both the assessment and the remediation work so the process can move forward.
It depends on the scope of the work. Smaller jobs like replacing an outlet or a switch usually require turning off only the circuit being worked on, not the whole house. A panel replacement or a service upgrade requires the main power to be off for part of the visit, and we confirm that with you before the appointment so you can plan around it.
The calls we see most often involve breakers that trip repeatedly, outlets that stopped working, and panels that were never updated to handle the load a modern household puts on them. Older homes in the area frequently have circuits that were added over the years without documentation, and tracing those is a common part of the diagnostic work.
If something has stopped working or started behaving strangely, call (947) 999-8795 and we will talk through what you are seeing.
A panel upgrade replaces the main service entrance and breaker panel with equipment rated for a higher load, typically moving from 100-amp to 200-amp service. A subpanel is a secondary panel fed from the main panel, used when a detached garage, a finished basement, or a workshop addition needs its own set of circuits without overloading the main panel. Which one a property needs depends on what the existing panel can carry and what the new load requires. We work through that on the call before anything is scheduled.
A dead outlet, a fixture that needs replacing, a circuit that needs labeling. None of those are too small to be worth a phone call. The big jobs matter, and so do the ones that just need to be handled before they become something larger.
Call (947) 999-8795 and we will scope it on the call, confirm the price, and get it on the schedule. We are available every day from 8 AM to 11 PM.
For every town we reach, see our area list. We also take electrical work in: Sterling Heights, Troy, Auburn Hills.
Below is a plain-language look at the electrical work we handle for homes and businesses in Shelby Township, Macomb County and across Macomb County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job on your list is not here, call and we will tell you exactly what it involves.
| Type of Work | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Whole-Home Surge Protection | Panel-mounted surge protector installation, Protection for all circuits at once, Guards against utility line voltage spikes, Pairs with an EV charger or panel upgrade | Homeowners with sensitive electronics, smart devices, or a new EV charger who want panel-level protection | A single surge event can damage appliances, electronics, and wiring. A panel-mounted unit covers every circuit in the house at once. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Load calculation before sizing, Permit and inspection coordination | Shelby Township, Macomb County homeowners adding an EV charger, finishing a basement, or running out of breaker slots | Many Shelby Township, Macomb County homes still have 100-amp service or a fuse box. A 200-amp upgrade clears the way for EV chargers, electric appliances, and modern circuit loads. |
| Electrical Safety Inspections | Panel and branch circuit review, Grounding and bonding check, GFCI and AFCI coverage audit, Written findings after the visit | Buyers, sellers, landlords, and owners of older homes who want a clear picture of the system | A pre-purchase inspection on an older Shelby Township, Macomb County home often surfaces wiring that has not been updated since the home was built. |
Call (947) 999-8795 and we will go through the details of your job, confirm what the panel can support, and give you a price before anything is scheduled.
(947) 999-8795