When a property changes hands, gets refinanced, or goes back on the rental market, the electrical system gets looked at. An inspection report that flags outdated wiring, an undersized panel, or missing arc-fault protection can delay a closing or complicate a lease. Keeping the wiring current and the documentation clean is not just a safety matter. It is a practical one, and it is the kind of thing that pays off later when somebody else is reviewing the work.
We handle the full range of residential and commercial electrical work in Troy and across the surrounding area.
Whether you are a homeowner dealing with a panel that has run out of room, a property owner preparing a rental for re-occupancy, or a contractor who needs the electrical scope handled on a renovation, call (947) 999-8795 and we will talk through what the job involves. We are available every day from 8 AM to 11 PM.
Troy has a mix of residential and commercial properties, and the electrical calls reflect that. Homes from the mid-twentieth century sit alongside newer construction, and each generation of building brings its own wiring considerations. The jobs we take on here cover everything from a single dead outlet to a full panel replacement, and the approach is the same regardless of scale: figure out what the situation actually calls for, explain it clearly, and get it done right.
A panel-mounted surge protector covers every circuit in the building from a single installation point. A power strip handles the devices plugged into it and nothing else. When a voltage spike comes in through the utility line, it reaches the panel before it reaches any individual outlet, and that is where the protection needs to be. For homes with EV chargers, HVAC circuits, or a lot of sensitive electronics, a whole-home device at the panel is the more complete answer.
A standard outlet swap is straightforward. What changes the job is location and code requirements. Kitchens, bathrooms, garages, and outdoor locations require GFCI protection. Bedrooms and most living areas require AFCI protection under current standards. When we replace an outlet or switch, we confirm the correct device type for that location rather than putting back what was there before.
An outdoor outlet needs more than a cover plate. The enclosure has to be rated for in-use protection, meaning it keeps the elements out even with a cord plugged in. We install weatherproof outlets and enclosures for exterior walls, garages, detached buildings, and anywhere else the outlet will see rain or temperature swings. The circuit feeding it gets GFCI protection at the right point in the run.
Three-way switching lets you control a fixture from two locations, and four-way switching extends that to three or more. The wiring involved is more involved than a single-pole switch, and getting the travelers run correctly matters. We handle new three-way installations and we fix existing ones where a previous wiring job left the circuit behaving unpredictably.
Knob-and-tube wiring was the standard for decades, and some Troy homes still have it in place, either throughout or in sections that were never updated. The wiring itself is not automatically a hazard, but it lacks a ground conductor, it cannot support GFCI or AFCI protection on those circuits, and insurers increasingly flag it. We replace knob-and-tube wiring with modern cable, update the panel connections, and install the correct protection devices for the circuits involved.
A welder or air compressor draws a load that a standard 15 or 20-amp circuit cannot support. Running that equipment on an undersized circuit trips breakers, damages the equipment, and puts stress on the wiring. We calculate the load the equipment requires, run a dedicated circuit at the correct amperage and voltage, and install the outlet type the equipment needs. For detached garages and workshops, a subpanel installation often makes more sense than running individual circuits back to the main panel.
Electrical problems don't wait, and neither do we, but on a renovation the timing of the electrical work is something worth thinking through before the walls close up. The rough-in phase, when boxes are set and cable is run, has to happen before drywall. If the electrician is not on site at the right point in the sequence, the framing crew covers up the walls and the electrical work either gets delayed or requires opening things back up.
The order matters on the other end too. Fixtures, outlets, and switches go in after paint. Scheduling the finish trim work before the walls are ready means a second visit, which adds time and cost to a project that is already being managed across multiple trades. We scope the electrical work in two phases where the job calls for it, rough-in and trim-out, and we confirm with the general contractor or the homeowner which phase is ready before we show up.
Load calculations are part of the conversation on any renovation that adds circuits. Adding a kitchen island, a home office, a finished basement, or a workshop means the panel needs to carry more than it did before. We check capacity before the work starts and handle the panel upgrade or subpanel installation if the existing service cannot support what is being added. The wiring done properly, start to finish, means the inspector signs off and the system does what it is supposed to do from day one.
Prior electrical work ranges from clean and code-compliant to improvised and hazardous, and most of what we encounter falls somewhere between those two ends. The approach is the same either way: look at what is there, determine whether it meets current standards, and explain what we found before anything is discussed about fixing it.
Some prior work can be corrected in place. A box that is overfilled can be replaced with a larger one. A circuit that lacks GFCI or AFCI protection can have the correct breaker or device added. Aluminum branch circuit wiring does not have to come out if the connections are handled correctly. Aluminum-wiring remediation involves replacing the devices at each connection point with rated alternatives and treating the connections so they do not oxidize and loosen over time. That is a repair, not a full rewire.
Other situations require replacement. Wiring that has been damaged, overheated, or modified in a way that cannot be made safe has to come out. We tell the difference by looking at the actual condition of the wiring and the connections, not by applying a blanket rule about age or material. Every job gets treated like it matters, because it does. Clear communication from the first call to the final test means you know what we found, what it requires, and what we are going to do about it before we start.
The price for an electrical job is based on what the job actually involves, and the only way to get an accurate number is to talk through the specifics. When you call, we ask about the situation, the type of property, and what you are trying to accomplish. From that conversation we give you a rate before anything is scheduled.
A few things can move a quote after the initial call. What the fault turns out to be once we open things up, what has to be accessed to reach it, and whether the existing circuit or panel can carry the change are the factors that affect the final scope. If something changes once we are on site, we explain why before the work continues. The price is confirmed before we schedule the visit, and you get a straight answer when you ask what it covers. For what the job actually entails, our list of electrical services lays it out.
Call (947) 999-8795 for a quote. We are available every day from 8 AM to 11 PM.
Appointments are arranged on the phone. When you call, we talk through the job, confirm the price, and set a time that works. For property owners who need to coordinate access with a tenant, we work through that on the call so the visit is set up correctly from the start.
Some electrical problems will not keep. A burning smell from a panel, a breaker that will not hold a reset, or a sparking outlet calls for prompt attention. We take short-notice calls and we answer them during our hours, every day from 8 AM to 11 PM. Electrical service scheduled without the runaround is what you get when you call.
For businesses and occupied rental properties that need to stay operational, we work around the schedule. That might mean sequencing the work so only one circuit is down at a time, or confirming in advance which areas will be without power and for how long. We confirm what is available when you book and keep the communication clear throughout.
Landlords and property managers often book the work, arrange access, and receive the invoice without being on site. We handle that without it becoming a problem. The scope and the price are confirmed on the call, access is arranged however the property requires, and the work is documented so the owner has a record of what was done.
After the job, that documentation matters. A rental property with a clear electrical record is easier to insure, easier to re-lease, and easier to sell. If a tenant reports an electrical issue and the landlord needs it handled quickly and correctly, we take the call and get it scheduled. Who receives the invoice is settled on the call, and we keep the communication straightforward throughout.
We serve Troy and the communities throughout Oakland County, including Clawson, Birmingham, Bloomfield Hills, Royal Oak, and Rochester Hills. Whether the property is in Troy or in one of the surrounding towns, the same work applies: repairs, panel upgrades, dedicated circuits, knob-and-tube replacement, EV charger wiring, generator hookups, and everything else we handle.
If you are not sure whether your address falls within our service area, call and we will confirm it on the spot.
A tenant can call us directly to describe what is happening. In most cases, we coordinate with the property owner or manager before scheduling the visit, since they are the ones authorizing the work.
If you are a tenant dealing with an electrical issue, calling (947) 999-8795 is the right first step and we will work out the logistics from there.
We scope the job on the call based on what needs to be done and how much time is available. If the work can be completed in the window, we schedule it. If the scope is larger than the gap allows, we explain that clearly so you can plan accordingly.
A subpanel draws its supply from the main panel and distributes circuits to a specific area, such as a detached garage, a workshop, or a finished basement. A main panel upgrade replaces the service entrance and the panel itself to increase the total capacity available to the whole house. Which one a property needs depends on whether the main panel has the capacity to support what is being added. We check that on the call and explain which approach fits the situation.
Many workshop tools run on 240 volts and draw more current than a standard circuit can carry. A well-wired workshop usually includes a mix of 20-amp 120-volt circuits and at least one or two 240-volt circuits, plus adequate lighting and a panel or subpanel sized for the total load. We scope the supply based on what the space will actually be used for.
If the panel is already labeled, accurate labeling helps. If it is not labeled or the labels are wrong, we handle that as part of the visit. You do not need to do anything to the panel before we arrive.
Yes. Every circuit, outlet, switch, or fixture we work on is tested before we leave. For panel work, we verify that each breaker is properly loaded and that the panel is functioning correctly before the job is signed off.
Aluminum branch circuit wiring does not have to come out in most cases. The issue is at the connection points, where aluminum and copper expand and contract at different rates and can loosen over time. Remediation involves replacing the devices at each outlet and switch with ones rated for aluminum wiring and treating the connections to prevent oxidation. Where the wiring itself has been damaged or overheated, those sections come out, but a full rewire is not always required. We look at the actual condition of the wiring before recommending a scope.
Electrical work that gets documented, done to code, and explained clearly is the kind that holds up later, whether that is a sale, a re-lease, or a permit inspection. We handle that work in Troy and across Oakland County.
Call Pontiac Electrical Company at (947) 999-8795 for a quote.
We are available every day from 8 AM to 11 PM. Power restored. Code-compliant. Done right.
Everywhere else we go is in our area list. Also serving the towns around: Royal Oak, Sterling Heights, Bloomfield Township, Auburn Hills, Shelby Township.
Below is a plain-language look at the electrical work we handle for homes and businesses in Troy, Oakland County and across Oakland County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job on your list is not here, call and we will tell you exactly what it involves.
| Type of Work | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Lighting Installation | Recessed LED and pendant fixtures, Exterior and security lighting, Under-cabinet lighting, Motion-sensor and photocell wiring | Homeowners updating interior lighting or adding outdoor fixtures for safety and function | Outdoor fixtures tied to a timer or photocell need a properly rated circuit run from the panel. We handle the wiring from the panel out. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Load calculation before sizing, Permit and inspection coordination | Troy, Oakland County homeowners adding an EV charger, finishing a basement, or running out of breaker slots | Many Troy, Oakland County homes still have 100-amp service or a fuse box. A 200-amp upgrade clears the way for EV chargers, electric appliances, and modern circuit loads. |
| Backup Generator Installation | Transfer switch or interlock kit installation, Dedicated circuit to generator connection point, Load review before hookup, Panel work for safe configuration | Oakland County homeowners who lose power during winter storms and need a reliable generator hookup | We handle all wiring and transfer switch work. We do not install or service the generator unit itself, but we handle everything from the panel to the connection point. |
Call (947) 999-8795 and we will go through the details of your job, confirm what the panel can support, and give you a price before anything is scheduled.
(947) 999-8795